|
|
|
Delta Adhesives are premium
quality products manufactured to the highest quality standards from
the finest materials available using state of the art technology. |
|
They provide designers/engineers
with rapid solutions to bonding, sealing, locking and joining problems.
Adhesives improve performance by reducing production costs, speed up assembly
lines and maintainence repairs.
|
D66 Stud Grade
Use where disassembly is unlikely locks, studs, bolts, nuts, screws
and pipe assemblies permanently. Ideal for use with worn threads.
Temp range -60°C to +150°C.
|
| D77 Nut Grade
Use where disassembly is required. Locks nuts, bolts, screws and
studs. Prevents fasteners working loose from vibration and shock.
Temp range -60°C to +150°C.
|
| D44 Screw Grade
Low strength locking of fasteners, can be re-adjusted. Use on
electronic assemblies, precision screws and instruments.
Temp range -60°C to +150°C.
|
|
D33 Penetrating Grade
Capillary action grade can be applied to assembled parts ie. threaded
fasteners, close fitting parts, seals porous castings, instrument
assembly. Can be disassembled.
Temp range -60°C to +150°C
|
|
D333 Pipe
Sealant Grade
Pipe sealant general purpose. Use on screwed threads, on pipework,
pneumatic systems and air brake connections.
Temp range -60°C to +150°C.
|
| D444 Multi Gasket
Eliminates need for pre-cut gaskets. Use on face to face joints,
flanges, engine assembly, gear box and axle casings.
Temp range -60°C to +150°C.
|
| D555 Flex Gasket
High performance gasket. Use on rigid and flexible assemblies.
High pressure sealing on face to face joints flanges, engine covers,
pump faces, motors, compressors etc.
Temp range -60°C to +180°C.
|
| D888 Hydraulic Grade
Sealing of hydraulic connections, pneumatic fittings, ideal for
sealing unions and olives on diesel fuel lines. Will not clog
filters or valves.
Temp range -60°C to +150°C.
|
|
D22 Bearing Grade
Retaining of bearings, cylindrical parts, bushes and oil seals
that require disassembly. Parts can be dismantled with normal
hand tools.
Temp range -60°C to +150°C.
|
|
D55 High Strength Retainer
For permanent retention of cylindrical parts where maximum retention
is required, splines, bushes, keys, rotors to shafts, pulleys
and sprockets. High viscosity, gap filler.
Temp range -60°C to +150°C.
|
|
D88 Retaining Grade - High Temp
High Temperature retaining grade permanent retention. Gears, pulleys,
fans, couplings, oilite bushes, cams and rotors.
Temp range -60°C to +200°C.
|
| CYNO 40
A fast curing low viscosity cyanoacrylate suitable for rubber,
ceramics, plastics, metals,
"O" rings and UPVC.
Colour: Clear
Viscosity: Low
Gap FIll: 0.10mm
Shear: 30N/mm²
Set TIme: 2-30 secs
Equivalent: 406/495
|
| CYNO 110
A fast curing medium viscosity cyanoacrylate suitable for
rubber, EPDM, SBR, PVC,
metals and pottery. A general purpose cyanoacrylate.
Colour: Clear
Viscosity: Medium
Gap FIll: 0.10mm
Shear: 30N/mm²
Set TIme: 2-45 secs
Equivalent: 401
|
|
CYNO 1200
High viscosity cyanoacrylate use where vibration occurs, on
uneven surfaces, metals, plastics, ferrite magnets, rubber
and ceramics. High gap fill.
Colour: Clear
Viscosity: High
Gap FIll: 0.20mm
Shear: 30N/mm²
Set TIme: 5-60 secs
Equivalent: 415
|
|
CYNO 2000
Tough black cyanoacrylate use where high shock resistance
and flexing is required. Use on rubber, plastics, metals,
wire tacking, loud speakers and rubber to metal applications.
Colour: Black
Viscosity: High
Gap FIll: 0.30mm
Shear: 17N/mm²
Set TIme: 30-50 secs
Equivalent: 480
|
 |
CYNO GEL
A thixotropic cyanoacrylate, will not sag or slump. Use on
porous surfaces, vertical and overhead situations, fill large
gaps, on metals, plastics, ceramics, leather, adhering signs
and name plates.
Colour: Clear
Viscosity: Very High
Gap FIll: 0.50mm
Shear: 18N/mm²
Set TIme: 60-100 secs
Equivalent: 454
|
| D200
Colour: Clear
QTY: 310ml
Description: Delta silicone rubber sealants
are one part moisure cure (R.T.V.). They are 100% silicone,
will not shrink and remain flexible after cure, suitable for
use on most substrates. Excellent weather resistance. Acetic
acid fumes evolve during cure. Do not use on copper or lead.
Application: Ensure surfaces are clean before applying sealant,
use as a gasket bonding agent on metals, plastics, glass, wood,
concrete, plasterboard, acrylics, etc. A highly versatile product
use in the engineering, marine, construction and automotive
industries.
Temp: -60°C to +260°C
|
| D201
Colour: White
QTY: 310ml
Description: Delta silicone rubber sealants
are one part moisure cure (R.T.V.). They are 100% silicone,
will not shrink and remain flexible after cure, suitable for
use on most substrates. Excellent weather resistance. Acetic
acid fumes evolve during cure. Do not use on copper or lead.
Application: Ensure surfaces are clean before applying sealant,
use as a gasket bonding agent on metals, plastics, glass, wood,
concrete, plasterboard, acrylics, etc. A highly versatile product
use in the engineering, marine, construction and automotive
industries.
Temp: -60°C to +260°C
|
| D202
Colour: Black
QTY: 310ml
Description: Delta silicone rubber sealants
are one part moisure cure (R.T.V.). They are 100% silicone,
will not shrink and remain flexible after cure, suitable for
use on most substrates. Excellent weather resistance. Acetic
acid fumes evolve during cure. Do not use on copper or lead.
Application: Ensure surfaces are clean before applying sealant,
use as a gasket bonding agent on metals, plastics, glass, wood,
concrete, plasterboard, acrylics, etc. A highly versatile product
use in the engineering, marine, construction and automotive
industries.
Temp: -60°C to +260°C
|
| D203
Colour: Clear
QTY: 85g
Description: DELTA instant gasket (RTV cure)
A specially formulated premium silicone to replace pre-formed
gaskets. It forms a flexible rubber seal and is resistant to
oils, water and antifreeze. Not suitable for immersion in petrol.
Application: Ensure surfaces are clean, suitable
for, engine casings, flanges, transmissions, used widely in
engineering, marine and automotive industries.
Temp: -60°C to +260°C
|
|
D204
APPLICATION GUN FOR 310ml CARTRIDGES |
| D205
Colour: Black
QTY: 310ml
Description: DELTA Polyurethane sealant adhesive
(RTV cure) is a very high quality product, minimum shrink and
has a very high degree of flexibility it remains permanently
elastic after cure, has very good adhesion to many substances
and excellent resistance for use where vibration occurs.Weather
proof and resists many chemicals.
Application: Ensure surfaces are clean before
application, will seal and bond steel, aluminium, stainless
steel, wood, concrete, plastics, fibreboard, fibreglass etc.
used in engineering, auto, marine, electrical and construction
industries. Can be overpainted when cured.
Temp: -30°C to +90°C
|
| D206
Colour: Grey
QTY: 310ml
Description: DELTA Polyurethane sealant adhesive
(RTV cure) is a very high quality product, minimum shrink and
has a very high degree of flexibility it remains permanently
elastic after cure, has very good adhesion to many substances
and excellent resistance for use where vibration occurs. Weather
proof and resists many chemicals.
Application: Ensure surfaces are clean before
application, will seal and bond steel, aluminium, stainless
steel, wood, concrete, plastics, fibreboard, fibreglass etc.
used in engineering, auto, marine, electrical and construction
industries. Can be overpainted when cured.
Temp: -30°C to +90°C
|
| D207
Colour: White
QTY: 310ml
Description: DELTA Polyurethane sealant adhesive
(RTV cure) is a very high quality product, minimum shrink and
has a very high degree of flexibility it remains permanently
elastic after cure, has very good adhesion to many substances
and excellent resistance for use where vibration occurs. Weather
proof and resists many chemicals.
Application: Ensure surfaces are clean before
application, will seal and bond steel, aluminium, stainless
steel, wood, concrete, plastics, fibreboard, fibreglass etc.
used in engineering, auto, marine, electrical and construction
industries. Can be overpainted when cured.
Temp: -30°C to +90°C
|
 |
D208
Colour: Red
QTY: 85g
Description: DELTA Red gasket seal is a premium
quality (RTV cure) sealant. To replace pre formed gaskets where
high temperatures occur. Suitable for use on fuel systems.
Application: Ensure surfaces are clean, suitable for, engines,
gaskets on flanges, pumps, motors, sealing on heating systems,
used in engineering, marine and auto-mobileindustries.
Temp: -60°C to +300°C
|
D209
Colour: White
QTY: 290 ml
Description: D209 CLEAN ROOM SEALANT (FDA APPROVED)
AN MS polymer for use in food environments such as the following:
Food processing, laboratories, hospitals, ice cream vans, bakeries,
clean rooms, electronic assembly, refrigerated vehicles, food
delivery vehicles etc. (overpaintable with water based paints)
This sealant also acts as a physical barrier against micro organisms
(IKI - report)Available in white only (FDA Approved (IANESCO -
report) |
| D300
Description: Rapid Cure Epoxy: Two Part Twin Syringe.
QTY: 28ml
Cure Time: 5 mins Colour when cured Amber
Basic Usage: General Purpose. Will Bond, Wood,
Concrete, Tiles, Metals etc.
Application: Cut end off dispensing nozzles squeeze
out required amount mix together untill even colour, apply to prepared
surface, when finished seal end of nozzles with end cap provided.
|
| D301
Description: Rapid Cure Epoxy: Two Part Twin Syringe.
QTY: 28ml
Cure Time: 10-15 mins Colour when cured Steel Grey
Basic Usage: Steel Epoxy Substitute. Will Bond
and Repair Steel Castings, Broken Flanges, Valves, Key Ways and
Cast Iron Components.
Application: Cut end off dispensing nozzles squeeze
out required amount mix together until even colour, apply to prepared
surface, when finished seal end of nozzles with end cap. Smooth
down with damp cloth for smooth finish.
|
| D303
Description: Quick Steel Epoxy: Two Part Paste.
2-1 Mix Ratio. Bulk Pack.
QTY: 500g
Cure Time: 4 hours Colour when cured Steel Grey
Basic Usage: Steel Epoxy Substitute. Will Bond
and Repair Steel Castings, Broken Flanges, Valves, Key Ways and
Cast Iron Components. For larger usage, slow cure.
Application: Use two parts base to one part activator,
mix together until even colour then apply to prepared surface. Smooth
down with water and spatula for smooth finish.
|
| D304
Description: Steel Stick Epoxy: Two Part in Putty
Form.
QTY: 125g
Cure Time: 30 mins Colour when cured Steel Grey
Basic Usage: Steel Epoxy Substitute. Will Bond
and Repair Steel Castings, Broken Flanges, Valves, Key Ways and
Cast Iron Components.
Application: Break off required amount knead together
until even colour. Apply to prepared surface. Smooth down with water
and spatula for smooth finish.
|
| D305
Description: Aqua Stick Epoxy: Two Part in Putty
Form.
QTY: 125g
Cure Time: 45 mins Colour when cured White
Basic Usage: Aqua Stick will cure under water,
Bonds and Repairs Fibreglass, Metals, Ceramics, Wood, Concrete,
Pipes, Valves etc.
Application: Break off required amount knead together
until even colour. Apply to prepared surface. Smooth down with water
and spatula for smooth finish.
|
| D306
Description: Plastic Stick Epoxy: Two Part in Putty
Form.
QTY: 125g
Cure Time: 2-3 hours Colour when cured White
Basic Usage: Plastic Stick Bonds to PVC, CPVC,
ABS, Gutters, Drain Pipes, Automotive Repairs and Domestic Appliances.
(Not suitable for Polyolefins)
Application: Break off required amount knead together
until even colour. Apply to prepared surface. Smooth down with water
and spatula for smooth finish.
|
| D307
Description: Copper Stick Epoxy: Two Part in Putty
Form.
QTY: 125g
Cure Time: 30 mins Colour when cured Copper
Basic Usage: Copper Epoxy Stick used to repair
Pipes, Elbows, Sink Taps, Water Heaters. Will seal freeze breaks
in pipework.
Application: Break off required amount knead together
until even colour. Apply to prepared surface. Smooth down with water
and spatula for smooth finish.
|
| D308
Description: Wood Stick Epoxy: Two Part in Putty
Form.
QTY: 125g
Cure Time: 45 mins Colour when cured Wood
Basic Usage: Moulds to repair or restore Wooden
Objects, Carvings, Frames, Mouldings and fills holes. Furniture
repair.
Application: Break off required amount knead together
until even colour. Apply to prepared surface. Smooth down with water
and spatula for smooth finish.
|
| D309
Description: Aluminium Epoxy Paste: Two Part Paste.
2-1 Mix Ratio. Bulk Pack.
QTY: 500g
Cure Time: 4-5 hours Colour when cured Aluminium
Basic Usage: Aluminium Epoxy Substitute will bond
and repair Aluminium Castings, Aluminium Tanks, Pipework etc.
Application: Use two parts base to one part activator,
mix together until even colour then apply to prepared surface. Smooth
down with water and spatula for smooth finish.
|
D310
Description: Epoxy Cartridge Fast Cure
QTY: 50ml
Cure Time: 5 mins cure
Basic Usage: Two part, bonds glass, ceramics, metals, hard
plastics and optical fibres.
Application: Easily dispensed with application gun and
mixing nozzle ideal for assembly work.
|
D311
Description: Epoxy Cartridge Slow Cure
QTY: 50ml
Cure Time: 30 min cure
Basic Usage: Two part, bonds glass, ceramics, metals, hard
plastics and optical fibres.
Application: Easily dispensed with application gun and
mixing nozzle ideal for that larger area assembly work.
|
D312
Description: Application Gun
Basic Usage: For use with Epoxy Cartridge and Mixing Nozzle,
enable product to be applied as mixture.
Application: Dispenses from cartridge through nozzle.
|
D313
Description: Replacement Nozzles
QTY: 1 packet = 10 nozzles
|
D314
Description: PLASTIC WELDER
QTY: 24ml Syringe
A toughened adhesive for use on most plastics, PVC, ABS, Acrylics,
polyesters, vinyl esters and urethane. Plastic Welder has good resistance
to outdoor weathering and cures in 5 to 10 min. Bonded materials
can be handled in 20 to 30 mins. Ensure proper mixing to even colour
- (Not suitable for P/E or P/P)
|
D370
Description: FUSION BOND
QTY: 50ml CARTRIDGE
A structural acrylic bonder for use on most materials. This versatile
product creates a high impact bond on all metals, composites, ceramics,
wood and glass. Fusion bond is ideal for bonding dissimilar materials
and has a fast cure of 10 min. Applications include boats, fibreglass,
automotive spoilers, vehicle roofs, ducting sheet metal applications,
sports goods and aerospace. Fusion Bond has high resistance to fuels,
lubricants and solvents and has good gap filling properties and
high impact strength. Off white colour.
|
|
D400
Description: Turbo Superglue Tube
QTY: 3g
Basic Usage: Will bond most materials in seconds,
pottery, steel, brass, leather, plastics, rubber and jewellery.
A premium quality superglue.
Application: Remove cap and nozzle. Invert cap,
puncture tube. Replace nozzle and cap. Apply adhesive to one surface,
press firmly together.
|
|
D402
Description: Extra Superglue
QTY: 5g
Basic Usage: Will bond most materials in seconds,
pottery, steel, brass, leather, plastics, rubber and jewellery.
A general purpose superglue.
Application: Cut end of nozzle, ensure surfaces
are clean and dry. Apply adhesive to one surface, press firmly
together. Will bond in seconds.
|
|
D403
Description: Extra Superglue
QTY: 20g
Basic Usage: Will bond most materials in seconds,
pottery, steel, brass, leather, plastics, rubber and jewellery.
A general purpose superglue.
Application: Cut end of nozzle, ensure surfaces
are clean and dry. Apply adhesive to one surface, press firmly
together. Will bond in seconds.
|
|
D404
Description: Cyanoacrylate Activator
QTY: 200ml
Basic Usage: A specially formulated activator
to reduce cure time of cyanoacrylate adhesives. Also for use on
inactive surfaces.
Application: AEROSOL APPLICATOR READ INSTRUCTIONS
ON CAN
|
|
D405
Description: Anaerobic Activator
QTY: 200ml
Basic Usage: A specially formulated activator
to reduce cure time of anaerobic adhesives. Also for use on inactive
surfaces.
Application: AEROSOL APPLICATOR READ INSTRUCTIONS
ON CAN
|
|
D406
Description: Surface Preparation Cleaner
QTY: 400ml
Basic Usage: Use cleaner to prepare surfaces
before application of all Delta adhesives and sealants.
Application: AEROSOL APPLICATOR READ INSTRUCTIONS
ON CAN
|
| D407
Description: Polypropylene (Cynoacrylate) Activator
QTY: 50ml (PUMP SPRAY)
Basic Usage: Use to activate surfaces on polypropylene
substrates. Which are difficult to bond.
Application: Apply to surfaces being bonded.
Allow to evaporate then apply adhesives to one surface.
|
|
D408
Description: Extra Superglue
QTY: 50g
Basic Usage: Will bond most materials in seconds,
pottery, steel, brass, leather, plastics, rubber and jewellery.
A general purpose superglue.
Application: Cut end of nozzle, ensure surfaces
are clean and dry. Apply adhesive to one surface, press firmly
together. Will bond in seconds.
|
|
D409
Description: Contact Adhesive
QTY: 500ml
Basic Usage: Rubber based adhesive, bonds, laminates,
wood, plastics, leather, cork, rubber, stone, metals, fabrics.
Application: INSTRUCTIONS ON CONTAINER
|
|
D411
Description: Spray Adhesives
QTY: 500ml
Basic Usage: As Contact Adhesives in spray form.
Application: AEROSOL APPLICATOR READ INSTRUCTIONS
ON CAN
|
|
D500
Description: "O" Ring Splicing Kit,
Metric and Imperial Sizes
QTY: 1 kit
Basic Usage: Enables on site making up of "O"
rings,
covering sizes of 1.6mm - 8.4mm
1/16 inch to 1/4 inch nitrile cord.
Application: Select size of cord required, insert
in "V" block, cut to length. Apply cyanoacrylate to
one surface, press firmly together, will bond in seconds.
|
|
D501
Description: Copper Anti-Seize Compound
QTY: 5g
Basic Usage: Protects metal parts against rust,
corrosion, heat, salt water, alkalis and acids. Prevents seizure
of threaded parts, forms protective coating that will not wash
off. Prevents disc brake squeal.
Do not apply to friction material
Application: Ensure surfaces are clean for ease
of application. Apply to threaded parts, gaskets, spark plugs
etc. and high temperature applications. Ideal for brush application.
|
|
D502
Description: Copper Anti-Seize Compound
QTY: 500g
Basic Usage: Protects metal parts against rust,
corrosion, heat, salt water, alkalis and acids. Prevents seizure
of threaded parts, forms protective coating that will not wash
off. Prevents disc brake squeal.
Do not apply to friction material
Application: Ensure surfaces are clean for ease
of application. Apply to threaded parts, gaskets, spark plugs
etc. and high temperature applications. Ideal for brush application.
|
|
D503
Description: Copper Anti-Seize Compound
QTY: 3kg
Basic Usage: Protects metal parts against rust,
corrosion, heat, salt water, alkalis and acids. Prevents seizure
of threaded parts, forms protective coating that will not wash
off. Prevents disc brake squeal.
Do not apply to friction material
Application: Ensure surfaces are clean for ease
of application. Apply to threaded parts, gaskets, spark plugs
etc. and high temperature applications. Ideal for brush application.
|
|
D504
Description: Copper Anti-Seize Spray
QTY: 400ml
Basic Usage: As 501, 502, 503, in aerosol spray
form
Application: AEROSOL APPLICATOR READ INSTRUCTIONS
ON CAN
|
|
D505
Description: Air/Gas Leak Detector Spray
QTY: 200ml
Basic Usage: Use to detect leaks in air/gas systems,which
operate under pressure.
Application: AEROSOL APPLICATOR READ INSTRUCTIONS
ON CAN
|
|
D506
Description: Air Brake - Pipe Sealant ( Anaerobic)
Concertina
QTY: 75ml
Basic Usage: To seal metal threaded parts on
air brakes and pipe connections. New design concertina Applicator.
Application: Apply to one surface, ensure joint is filled completely
with sealant. Assemble and allow to cure.
|
|
D510
Description: MULTI GASKET (ANAEROBIC) CONCERTINA
QTY: 75ml
High performance multigasket in a unique concertina complete with
shroud for easy dispensing. Multigasket has good solvent resistance
and applications include engine casings, gearboxes, differentials
and flanges. Orange colour.
|
|
D511
Description: FOOD SAFE LUBE (AEROSOL)
QTY: 400ml
A Highly effective lubricant designed to meet the stringent requirements
of food environments. Used to lubricate conveyors, mixers, wrappers,
packaging machinery, filling machines and all food processing
equipment used in bakeries, dairies, canneries, meat and fish
processing. This product is odour and taste free, it is a colourless
long life lubricant which is non-toxic and non flammable.
|
|
D512
Description: MITRE BONDER
QTY: 50gm//200ml KIT
Mitre Bonder kit is a fast acting two part adhesive that has replaced
traditional fixings and provides a strong clean bond in seconds
on many materials. Ideal for the manufacture of furniture, typical
applications include bedrooms, kitchens, shop installations, cornice,
MDF profiles, picture framing and general woodworking. Mitre Bonder
is suitable for bonding MDF, wood, rubber, PVC, metal and some
plastics.Simply spray one surface with the activator and allow
to evaporate, apply adhesive to other surface, push both surfaces
together and place in position then hold for 10 seconds, simple
as that. Translucent bond.
|
| DST 100
Size: 12mm x 10MTR
Good resistance to Oil, Grease, Solvents, Humidity and Ultra Violet
Light, Moisture Stable, High Tack, Good Vibration and weather
resistance.
Uses: Automotive mouldings, decals, emblems and
mirror fixings.
|
| DST 101
Size: 19mm x 10MTR
Good resistance to Oil, Grease, Solvents, Humidity and Ultra Violet
Light, Moisture Stable, High Tack, Good Vibration and weather
resistance.
Uses: Automotive mouldings, decals, emblems and
mirror fixings.
|
| DST 102
Size: 25mm x 10MTR
Good resistance to Oil, Grease, Solvents, Humidity and Ultra Violet
Light, Moisture Stable, High Tack, Good Vibration and weather
resistance.
Uses: Automotive mouldings, decals, emblems and
mirror fixings.
|
| DST 103
Size: 50mm x 10MTR
Good resistance to Oil, Grease, Solvents, Humidity and Ultra Violet
Light, Moisture Stable, High Tack, Good Vibration and weather
resistance.
Uses: Automotive mouldings, decals, emblems and
mirror fixings.
|
| DT 200
Size: 50mm x 50MTR
Colour: Silver
Cloth backed tape with polythene film.
Good Tear and Moisture Resistance.
Max Temp: 60°C
|
| DT 201
Size: 50mm x 50MTR
Colour: Black
Cloth backed tape with polythene film.
Good Tear and Moisture Resistance.
Max Temp: 60°C
|
| DT 202
Size: 50mm x 50MTR
Colour: White
Cloth backed tape with polythene film.
Good Tear and Moisture Resistance.
Max Temp: 60°C
|
| DT 203
Size: 50mm x 50MTR
Colour: Red
Cloth backed tape with polythene film.
Good Tear and Moisture Resistance.
Max Temp: 60°C
|
| DT 204
Size: 50mm x 50MTR
Colour: Green
Cloth backed tape with polythene film.
Good Tear and Moisture Resistance.
Max Temp: 60°C
|
| DT 205
Size: 50mm x 50MTR
Colour: Blue
Cloth backed tape with polythene film.
Good Tear and Moisture Resistance.
Max Temp: 60°C
|
| DT 206
Size: 50mm x 50MTR
Colour: Yellow
Cloth backed tape with polythene film.
Good Tear and Moisture Resistance.
Max Temp: 60°C
|
| DT 210
ALUMINIUM FOIL TAPE
Size: 50mm x 25 MTR x 50 Micron
A durable self-adhesive high tack tape with good peel and excellent
tensile strength. This tape can be used on a wide range of materials
for industry. Applications include metal, aluminium, plastics,
fibreglass,and wood. It can also be used on ducting, insulation
and lagging and will operate as a heat shield to 160°C.
Service temperature: 30°C - 160°C
|
| DST 301
Size: 19mm x 50MTR
Positioning and Mounting Tape
Uses: Positioning before welding and drilling
also on vehicle interiors.
Max Temp: 60°C
|
| DST 302
STINGER TAPE 25MM X 25MTR ROLL
Uses: This versatile high tack, high temperature,
permanent tape is an excellent all round performance product.
Stinger Tape can be used on a multitude of materials such as
glass, powder coating processes, mirror backing, metals, aluminium,
carbon fibre, plastics and even the wife's lips! Replacing traditional
fixing methods, it's easier to apply and gives uniform bonding
with even stress distribution.
Temp Range: 200°C
|
| DST 303
HIGH TACK RESIN BONDING STRIP 25MM X 5MTR X 2MM
Uses: Resin tape is a high strength, very high
tack bonding strip. With it's unique non hardening toffee-like
appearance it remains flexible. It can be used on many applications
such as vehicle and boat building, repairs to caravans, manufacturing,
shopfittings and carpet fixing. Resin Tape is suitable for use
on wood, plastics, metals aluminium and carbon fibre and forms
a solvent free waterproof bond.
Service Temperature: 0°C - 40°C
|
|
DST 400
Size: 39mm x 26mm (Pack of 40)
High density P.E. foam - Black 100 grm/m³ Green Liner.
Uses: Good resistance to Oil, Grease, Solvents,
Humidity and Ultra Violet Light, Moisture Stable, High Tack,
Good Vibration Resistance.
Max Temp: 60°C
|
| DST 401
Size: 80mm x 25mm (Pack of 60)
High density P.E. foam - White.
Uses: Very high shear, moisture stable, good resistance to ultra
violet light, solvents, oil, grease. High tack.
Max Temp: 95°C
|
APPLYING DELTA PRODUCTS SUCCESSFULLY
- Surface preparation - best results
will be obtained by cleaning with D406 surface preparation cleaner.
Note: Some surfaces may be affected by solvents (ie plastics).
Test small area before use. A slightly roughened surface will
ensure good bonding.
CHOOSING AN ADHESIVE
- Select adhesive to suit application,
- does it need to be permanent or dismantled, what materials are being
bonded, is there a gap filling requirement? If in doubt call
our technical helpline.
HEALTH & SAFETY
- Care should be taken when handling
adhesives, ensure adequate ventilation, wear gloves and eye protection.
Cyanoacrylate adhesives will bond skin in seconds.
KEEP OUT OF REACH OF CHILDREN.
STORAGE: Store containers in a cool dark place.
|
