DELTA 210 TRU-FLEX 40MS
is an isocyanate free sealant which cures by reaction with atmospheric moisture to give a tough and durable elastic seal. Based on the latest technologies this solvent free formulation combines the best of silicone and polyurethane technologies. The unique one component curing system offers unrivalled adhesion characteristics on a wide range of substrates with minimum surface preparation.

Areas of Use:
• Bonding and sealing caravans, trailers and motor vehicle bodies.
• Sealing and bonding panels and cladding.
• Protection of welded joints and seams in automotive and metal fabrication.
• Sealing where overpaintability is required.

Benefits
• High bonding strength with good initial wet grab and quick curing.
• solvent and isocyanate free with low odour.
• Primeless adhesion on most common substrates.
• Neutral cure - non corrosive.
• Permanently flexible.

Colours
• Clear, white and black

290ml STANDARD CARTRIDGE PACK

DELTA 212 HIGH TEMPERATURE RTV
(ROOM TEMPERATURE VULCANISING) SILICONE SEALANTEALANT
is specially designed for high temperature industrial applications, curing by reation with atmospheric moisture to give tough and flexible rubber seal. The formulation has an extremely low shrinkage, quick curing and is completely solvent free.

Areas of Use:
• Industrial and engineering uses such as gasket and sealing replacement.
• For joints and assemblies which must be resistant to high temperatures in ducting, metal chimneys, industrial/domestic ovens, heating appliances.
• High temperature metal to metal and glass to metal expansion joints.

Benefits
• Excellent temperature resistance.
• Remains flexible • from -50°C to +300°C.
• Excellent adhesion to non-porous surfaces.
• Fast cure with low dirt pick up.
• Liquid/gas tight seal.

Colours
black

300ml STANDARD CARTRIDGE PACK

DELTA 213 HIGH TEMPERATURE RTV
is specially designed for high temperature industrial applications, curing by reaction with atmospheric moisture to give tough and flexible rubber seal. The formulation has an extremely low shrinkage, quick curing and is completely solvent free.

Areas of Use:
• Industrial and engineering uses such as gasket and sealing replacement.
• For joints and assemblies which must be resistant to high temperatures in ducting, metal chimneys, industrial/domestic ovens, heating appliances.
• High temperature metal to metal and glass to metal expansion joints.

Benefits
• Excellent temperature resistance.
• Remains flexible • from -50°C to +300°C.
• Excellent adhesion to non-porous surfaces.
• Fast cure with low dirt pick up.
• Liquid/gas tight seal.

Colours
black

200ml SELF-APPLICATOR PACK

D350 Fast Black 2 part Polyurethane Structural Adhesive
is a two part, very fast setting,
room temperature curing, polyurethane adhesive system.
This 1:1 mix ratio system has excellent primeless adhesion
to a wide variety of surfaces.

Features
• General bonding and sealing.
• Sandable and overpaintable.
• Excellent adhesion to both metals and thermoplastics.
• 60 to 100 seconds working time.
• 10 minutes fixture time.
• Available in 50 ml 1:1 cartridge.

Areas of Use:
Adhesion of:
• Automotive trims and fittings.
• Cosmetic plastic part repairs (bumpers, spoiler etc.)
• Cladding and panel bonding applications.
• Any high specification bonding use.

D360 manual 50ml cartridge plunger kit
is a new innovative plastic plunger kit which converts a standard 50ml 1:1 cartridge into a handy ‘syringe’ style pack, avoiding the need to purchase more expensive professional applicator guns.

Ideal for the less frequent user of two part adhesive and ‘one off’ applications.

NEW FROM DELTA
• Can withstand up to 1000oC
• Easy to apply

For prices & availability contact Peter or Vicky at the number below!